Tearout and splintering when cutting plywood can be an annoying and time-consuming problem, but it doesn’t have to be. With the right tools and techniques, you can prevent tearout and splintering when cutting plywood once and for all. Here are a few tips to help you get the job done right.
1. Use a sharp blade. The most important factor in avoiding tearout and splintering when cutting plywood is to use a sharp blade. A dull blade will cause more tearout and splintering than a sharp one. When in doubt, replace the blade.
2. Use a scoring knife. Before you cut through the plywood, use a scoring knife to score the cut line. This will help to prevent tearout and splintering.
3. Use clamps. Clamping the plywood down before you cut it will help to keep it from shifting and causing tearout and splintering.
4. Use a zero-clearance throat plate. A zero-clearance throat plate is a special plate that fits into your saw and helps to prevent tearout and splintering. It’s designed to fit snugly against your saw blade, which helps to keep the wood from shifting and causing tearout and splintering.
5. Use a jig. A jig is a simple device that helps to guide your saw blade and keep it from shifting and causing tearout and splintering.
6. Use a backing board. A backing board is a piece of scrap wood that you attach to the back of the plywood. This helps to keep the wood from shifting and causing tearout and splintering.
7. Use a sacrificial fence. A sacrificial fence is a piece of scrap wood that you attach to your saw’s fence. This helps to keep the wood from shifting and causing tearout and splintering.
By following these tips, you can prevent tearout and splintering when cutting plywood once and for all. With the right tools and techniques, you can make sure that your projects come out looking great.
How to Prevent Tearout and Splintering When Cutting Plywood, Once and For All
